|
|
|
AK offers an extensive line of
basin covers and accessories just right for your particular installation. Covers are available in Painted Steel,
Structural Foam, and Plastic Domes for simplex and duplex
applications. In response to the demand for radon sealed
systems, there are several covers especially designed for radon
applications that come complete with seal gaskets and bolts.
|
|
|
|
|
Discharge
Flanges |
Hubs |
 |
 |
| Gasket
Packs |
|

|
| Model
Series |
Description |
| AKP80000 |
Structural
Foam Covers |
| AKP60000 |
Plastic
Dome Covers |
| AKP70120 |
Painted
Steel Covers |
| AKP70000 |
Painted
Steel Split Covers |
| AKP10000 |
Cover
Gasket Packs |
| AKP10000 |
Hubs |
|
|
Check Valves |
|

|
- Installs in Minutes
- Corrosion Resistant ABS body
- Buna-N Flapper Valve
- Rubber Sleeves
- Stainless Steel Clamps
- Full Flow Opening
- Pressure Tested and Guaranteed against
Leakage when Properly Installed
- Available in 1.25", 1.5" and
2"
- Works with Galvanized Steel and Schedule 40
Plastic Piping
|
|
|
Liquid Level
Alarm (I/O) |
|

|
Monitors Liquid Levels in Sump & Sewage Basins,
Septic Tanks, Aeration Systems, Cisterns, Atmospheric Storage Tanks,
Chemical Solution Tanks & More! (Indoor / Outdoor Use)
- Red Alarm Light
- High Decibel Alarm
- 6' Heavy Duty 3-Wire Power Cord
- Grounded Molded Plug
- 2-3/8" Seal-Tight Cord Connectors
- N/O Float Switch with 10' Cord
- Normal/Silent/Test Toggle
- In-Line Fuse Protection
- 4X Type Fiberglass Enclosure
- Captive Screw Cover with Stainless Screws
- External Mounting Feet
- Sealed Switch and Light
- Installs in Minutes
- One Year Limited Warranty
|
Part
Number |
Enclosure
Type |
Input
Power |
Control
Fuse |
Power
to Sump |
Standard
Float Switch |
Approx
Ship Wt. |
| AKP10150 |
4X |
115 VAC |
1 Amp |
115 VAC |
N/O - 10'
Mercury |
2 lbs. |
|
|
Liquid Level
Alarm (I) |
|

|
Monitors High Levels in Residential Sewage Basins,
Sewage Holding Tanks or Wet Pits, Sump Basins, Industrial Holding
Tanks & More! (Indoor Use Only)
- Red Warning Light
- High Decibel Alarm
- 6" Heavy Duty 3-Wire Power Cord
- Grounded Molded Plug
- N/O Float Switch with 10' Cord
(Non-Mercury Float Tilt Switch)
- Alarm Re-Set/Silence Switch
- Push to Test Switch
- Steel Indoor Enclosure
- Internal Mounting Hole
- Installs in Minutes
- Two Year Limited Warranty
CSA NRTL-C (USA) Approved!
|
Part
Number |
Enclosure
Type |
Input
Power |
Power
to Sump |
Standard
Float Switch |
Approx
Ship Wt. |
| AKP10140 |
Steel,
Indoor Use |
120 VAC |
120 VAC |
N/O - 10'
Mechanical |
4 lbs. |
|
Float
Switches |
|
Mercury
Control Panel |
Mechanical
Pump |
|

|

|
- Polyurethane Closed Cell Foam Construction
- Cord Fully Molded in Polyurethane Foam
- Flexible SJOOW-CPE 18/2 Cord with Blunt End
- 10' Standard
- Rated 10 Amps at 115/230 VAC
- 12° Operating Narrow Angle Switch
- Mercury-to-Mercury Contacts (0.86 grams)
- Available With or Without External Cord
Weights
- Available in Various Cord Lengths
|
- High Impact Polystyrene Construction
- Ultrasonically Welded Cord with Epoxy
Plotted Seal
- Flexible SJOW 16/2Cord with Piggyback Plug
- 10' Standard
- Rated 13 Amps at 120/240 VAC - 58.8 Amp
Overload
- Rated for 1/2 HP Pump at 120 VAC - 1 HP
Pump at 240 VAC
- 90° Operating Wide Angle Switch
- Available With or Without External Cord
Weights
- Available in Various Cord Lengths
|
|