The Taco Analog 24 Hour Clock Timer/Temperature Aquastat combination is designed to cycle the circulator during peak demand periods. The Clock Timer is adjustable to 15-minute intervals within a 24-hour time frame. The Temperature Aquastat automatically switches the circulator ON at 95 Deg. F. and OFF at 115 Deg. F. The two can be used in combination, or they can be used separately. When the Clock Timer/Temperature Aquastat are used together, the Timer switches ON sending power to the unit. The Temperature Aquastat measures the temperature, and cycles the circulator as long as the Timer is switched to the ON mode.
If used separately, the Analog 24 Hour Clock Timer operates the circulator during the chosen number of 15-minute intervals. When using only the Temperature Aquastat, the circulator cycles continuously to maintain a temperature between 95 Deg. F. and 115 Deg. F.
The Clock Timer and Temperature Aquastat are retro-fittable to an Taco "00" Series Cartridge Circulator. This user-friendly clock has an hour hand, raised minute hand for ease of adjustment, two directional arrows and AM/PM time settings. The Clock Timer can be mounted in any direction, by just attaching it to the capacitor box electrical connection hole. One Aquastat fits both 3/4" and 1/2" pipe applications. The Aquastat snaps directly onto the 3/4" pipe and, for 1/2" applications, it snaps directly onto the discharge of the 1/2" bronze Circulator body.
| Timer: 24 Hour Analog Clock Timer | |
| Electrical Characteristics: | 115/60/1 |
| Timer Switch: | 16 Amp @ 115 Volt |
| Timer Interval: | 15 Minutes |
| Clock Face: | Hour & Minute Hands |
| Manual Switch: |
|
| Temperature Aquastat: Snap Action Temperature Switch | |
| Electrical Characteristics | 115/60/1 |
| Connections: |
|
| Temperature Setting: |
|
| Contacts: | 7 Amp SPDT Switch |
| Wire Leads: | 12" - Type 18-2 Round Premium Cable |